|
|
 |
Rua Frei Manuel dos Santos, n.º 47
3060-459 Ourentã - Cantanhede
PORTUGAL
351 231 416144
T: 1-877-EMATCH3
E-mail: info@electricmatch.com
|
|
J-Tek Electric Matches
J-Tek Match Head Packing |
|
|
J-Tek Match Head Technical Information |
|
Part Number |
Bridge Wire Resistance |
Maximum No-Fire Current |
Minimum All-Fire Current |
Recommended Min. Firing Current |
Recommended Nominal Firing Current |
Maximum Test Current |
|
J-Tek |
1 ohm
± .2 ohms |
.30 amp. |
.75 amp. |
1.00 amp. |
1.25 amp. |
.04 amp. |
|
|
J-Tek Description |
Designed identical to the M-Tek, but the explosive composition is Lead Free.
They burn slower, hotter, quieter, and are less sensitive to impact and friciton.
|
|
Part Number |
Lead Length |
Packaging
per Box |
Packing
per Case |
|
J-Tek1 |
30 cm |
80 |
2400 |
|
J-Tek2 |
61 cm |
80 |
2400 |
|
J-Tek3 |
91 cm |
80 |
2400 |
|
J-Tek7 |
198 cm |
40 |
1200 |
|
J-Tek10 |
305 cm |
30 |
900 |
|
J-Tek12 |
414 cm |
25 |
750 |
|
J- Tek15 |
505 cm |
20 |
600 |
|
An Additional Charge of $5.00 will be added to orders less than a full case. This charge is not figured into the pricing given. An order processing charge of $5.00 domestic & $10.00 international, per order will be in addition to FedEx shipping and a $20.00 FedEx hazmat fee. Price reflects payment of 50% deposit paid by check.
Call for prices on custom colors and lengths.
|
|
Quick-Fire LC |
It’s about time...and safety!
|
|
Quick-Fire LC was developed for use with our igniters. The e-match is placed inside a plastic housing that encases the e-match, reducing accidental ignition, and greatly decreasing the time it takes to squib.
|
|
|
You can attach directly into the lift charge for precise timing for choreographed shows.
Just pierce the lift charge bag with the pointed end of the clip and hold it in place with tape.
|
|
|
The pointed end of the clip can be inserted
into the end of the quickmatch, the quickmatch is folded over and held in place with a hitch of the e-match wire. |
|
|
A slit can be made in the side of the leader; the pointed end of the clip is inserted and held in place with a hitch the e-match wire. |
|
|
The end of the visco fuse can be inserted into the pointed end of the clip and then taped to the side of the cake. |
|
|
The clip is also compatible with the Vulcan/Shogun plastic adapters for quickmatch. |
Quick-Fire LC clips can be purchased separately or already attached to the e-match.
The cost of the Quick-Fire attachment is compensated
as it takes a fraction of the time to squib.
|
|
Duplex Fireworks Shooting Wire |
|
Part Number |
Wire Gauge |
Standard Spool Size |
Standard Packaging |
D.C. Resistance Per 1000 FT.
At 25 degrees C |
|
M24D |
.5 mm |
500 meters |
500 m = 4 Spools
|
25.6 ohms ea. |
|
|
|
Copyright © 2007, MJG Tecnologies Inc. All Rights Reserved.
|
Copyright © 2009, MJG Technologies Inc. All Rights Reserved.
|
